<< Zurück zur Webseite / Go back to the regular design..


WUKO Master 0420

Roof panel machine for making the profile for single and double-lock standing seams (seam height 25 mm / 1″)


Model 0420 and model 0420S (with longitudinal cutting facility) available

  • Machine frame made of modular aluminium profile system
  • Upper machine cover:
    Swing doors, easy to open, with safety switch, frame elements made of transparent, impact‐resistant polycarbonate
    ⇒ clear view during profiling process
    ⇒ easy access for adjustment and service
  • Mobile, two fixed and two swivel castors with brakes
  • 120 V or 230 V motor with frequency converter for continuously variable working speed:
    0–12 m/min / 0–40 ft/min - huge advantage for rounding the panels and for one-sided profiling
  • Forward and backward run


  • Fabrication of the profile for the single or double-lock standing seam
    seam height 25 mm / 1″
  • Working width between 290 and 810 mm / 11.5″ and 32″ continuously adjustable by hand wheel over two spindles
    ⇒ panel width about 210–730 mm / 8.3–28.7″
  • Inlet guides easily and precisely adjustable (measure correction on the profile)
  • Clean profile, poor in tension, made by eight hardened roll forming stations
  • 8th forming station for aligning the panels and for curving the panels – convex or concave – smallest radius about 6 m / 20′
  • Cut‐proof, extremely resilient polyurethane coated drive rollers
  • Electromechanic preset counter – safely placed within the frame
  • Also for profiling short (min. length about 500 mm / 20″) or tapered panels

Technical Data